Hioki PW3198-01/1000 Pro Power Quality Analyzer (Custom 1000A Kit)

Home >

Discontinued

Product Code: PW3198-01/1000 PRO

Description

Application Notes

Datasheet PDF format

Power Quality Survey of Solar Power Generation Systems

HIOKI PW3198 Power Quality Analyzer

Power Quality Analyzer PW3198 | 3P4W, 600V, Class A - Hioki

■ Basic specifications (Accuracy guaranteed for 1 year)

Measurement line type	Single-phase 2-wire, Single-phase 3-wire, Three-phase 3-wire or Three-phase 4-wire plus one extra input channel (must be synchronized to reference channel during AC/DC measurement)
Voltage ranges	Voltage measurement: 600.00 V rms Transient measurement 6.0000 kV peak
Current ranges	500.00 mA to 5.0000 kA AC (depends on current sensor in use)
Basic accuracy	Voltage: ±0.1% of nominal voltage Current: ±0.2 % rdg. ±0.1 % f.s. + current sensor accuracy Active power: ±0.2 % rdg. ±0.1 % f.s. + current sensor accuracy
Measurement items	1. Transient over voltage : 2 MHz sampling 2. Frequency cycle : Calculated as one cycle, 40 to 70 Hz 3. Voltage (1/2) RMS: one cycle calculation refreshed every half cycle Current (1/2) RMS: half-cycle calculation 4. Voltage swell, Voltage dips, Voltage interruption 5. Inrush current 6. Voltage waveform comparison 7. Instantaneous flicker value: As per IEC61000-4-15 8. Frequency: Calculated as 10 or 12 cycles,40 to 70 Hz 9. 10-sec frequency: Calculated as the whole-cycle time during the specified 10 s period, 40 to 70 Hz 10. Voltage waveform peak, Current waveform peak 11. Voltage, Current, Active power, Apparent power, Reactive power, Active energy, Reactive energy, Power factor, Displacement power factor, Voltage unbalance factor, Current unbalance factor (negative-phase, zero-phase) 12. High-order harmonic component (voltage/ current): 2 kHz to 80 kHz 13. Harmonic/ Harmonic phase angle (voltage/ current), Harmonic power: 0th to 50 th orders 14. Harmonic voltage-current phase angle: 1th to 50 th orders 15. Total harmonic distortion factor (voltage/ current) 16. Inter harmonic (voltage/ current): 0.5 Hz to 49.5 Hz 17. K Factor (multiplication factor) 18. IEC Flicker, Δ V10 Flicker
Record	55 weeks (with repeated recording set to [1 Week], 55 iterations) 35 days (with repeated recording set to [OFF])
Interfaces	SD/SDHC card, RS-232C, LAN (HTTP server funtion), and USB2.0
Display	6.5-inch TFT color LCD (640 × 480 dots)
Power supply	AC Adapter Z1002 (12 V DC, Rated power supply 100 V AC to 240 V AC, 50/60 Hz) Battery Pack Z1003 (Ni-MH 7.2 V DC 4500 mAh)
Dimensions and mass	300 mm (11.81 in) W × 211 mm (8.31 in) H × 68 mm (2.68 in) D (excluding protrusions), 2.6 kg (91.7 oz) (including battery pack)
Accessories	Instruction manual × 1, Measurement guide × 1, Voltage Cord L1000 × 1 set (Red/Yellow/Blue/Gray, each 1, Black × 4, Alligator clip × 8), Spiral tube × 20, Input Cable Labels × 1, AC Adapter Z1002 × 1, Strap × 1, USB cable (1 m 3.28 ft length) × 1, Battery Pack Z1003 × 1, SD memory card 2GB Z4001 × 1

Features

3-Phase 4-Wire Power Quality Analyzer Compliant to IEC61000-4-30 Class A Standards with Dynamic 1300V Range, Harmonic and Inter-harmonics Analysis Capabilities

Hioki portable power meters and analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The PW3198 is a power quality analyzer for monitoring and recording power supply anomalies, allowing their causes to be quickly investigated, and also for assessing power supply problems such as voltage drops, flicker, harmonics, and other electrical issues.

• PW3198 (main unit only)
• PW3198-90 (PW3198 PQA bundled with the PQA-HiView Pro 9624-50)
Note: Voltage can be measured with the main unit alone. An optional current sensor is necessary to measure current or power parameters. Use the PQA-HiView Pro 9624-50 (version 2.00 or later) with a PC to analyze the data collected to the SD card.

• Verify power problems in accordance with the IEC61000-4-30 Class A standard
• High accuracy and continuous gapless recording
(V: ±0.1% of nominal voltage, A and W: ±0.2% rdg. ±0.1% f.s.)
• CAT IV 600V - safe enough for incoming power lines
• Broadband voltage range lets you measure even high-order harmonic components of up to 80 kHz
• Wide dynamic range from low voltages up to 1300V (3P4W line-to-line voltage)
• Maximum 6000V transient overvoltage up to 700kHz
• LAN, USB and SD card interfaces
• Optional GPS BOX for synchronizing multiple devices

Share your knowledge of this product with other customers... Be the first to write a review

	Sorensen SGA 200-25, Programmable Power Supply 5kW 200V 25A Call us for Price and Availability. (619) 879-6696
	California Instruments FCS 54 Series II AC Power Supply Call us for Price and Availability. (619) 879-6696
	Sorensen XEL 30-3MJV 90W 30-3 with Low Voltage AC Input, 100VAC $1,227.29 US Dollars
	Sorensen SGA 80-250, Programmable Power Supply 20kW 80V 250A $25,775.40 US Dollars
	Sorensen SGA 200-100, Programmable Power Supply 20kW 200V 100A $25,775.40 US Dollars
	BK Precision LC 210A Oscilloscope and Spectrum Analyzer Carrying Case. New in Box.
	BK Precision 309 Digital Earth Resistance Meter. New in Box. Discontinued
	Sorensen SLM-60-60-300 Electronic Load 300W $2,768.00 US Dollars