The MT-Texture series ESD-safe 2-layer rubber matting is made of 100% co-extruded rubber. The durable two layer mat is constructed with a textured dissipative top layer and a conductive bottom layer and offers excellent resistance to hot solders, soldering irons and most solvents.

The MT-Texture series is 0.080" thick and available in 40’ rolls in 2', 30", 3' and 4' widths. Pre cut mat sizes are available with grounding hardware and common point ground cords. Available in Light Blue, Dark Blue, Gray and Green.

Meets or exceeds requirements of ANSI ESD S541-2003. RoHS compliant.

Specifications of the Transforming Technologies MT-Textured Series Two-Layer Rubber ESD Mat:

• Thickness: 0.08"
• Hardness: 60 (Shore A)
• Tensile Strength: >1000 PSI
• Elongation: >300%
• Top Layer Resistance: 10^7 ohms
• Bottom Layer Resistance: 10^4 ohms
  Decay Rate 5kv to 50v in less than .1 second

Textured 2 Layer ESD Rubber Matting:

The MT-Texture series ESD-safe 2-layer rubber matting is made of 100% co-extruded rubber. The durable two layer mat is constructed with a textured dissipative top layer and a conductive bottom layer and offers excellent resistance to hot solders, soldering irons and most solvents.
The MT-Texture series is 0.080" thick and available in 40’ rolls in 2, 30", 3 and 4 widths. Pre cut mat sizes are available with grounding hardware and common point ground cords..Available in Light Blue, Dark Blue, Green or Gray with the following features: following features

• Dissipative work surface: 10E6 - 10E8 ohms Rtt
• Thickness: 0.080 Inches
• Resistance to Ground: 8 x 10E6-8 ohms
• Resistance Point to Point: 2 x 10E6-8 ohms