AM Signal
100 KHz to 110MHz in 7 ranges and continuously variable over the whole range with a coarse & fine control.
Modulation Frequency
Selectable 400 Hz/ 1 KHz.
Modulation Depth
a) Internal Modulation 30%
b) External Modulation: Freq. Range 50Hz to 4kHz Bandwidth ±3dB.
Output Amplitude
200mV p-p at 75 ohms
Attenuation
2 x 20 dB step and continuously variable 20 dB (approx.).
FM Signal
30 MHz to 110 MHz
Modulation Frequency
Selectable 400Hz / 1kHz.
Frequency Modulation
a) Internal - 30kHz (approx.)
b) External Modulation: Freq. Range 50Hz to 4kHz Bandwidth ±3dB
Readout
5 digit, 0.3u00b2 LED display
Frequency Range
10Hz to 100MHz
Range Selection
Hz/KHz/MHz selection is automatic depending on mode selected
Source Selection
Internal AM/ FM/ Internal Function/ External Frequency - Logic selected.
Annunciation
GATE, OVERFLOW, Hz, KHz, MHz, INT AM/FM, FUNCTION, EXT FREQUENCY.
Gate Period
0.1 sec & 1 sec by LED indication for ext. counter mode.
Dynamic Range
50mV to 1V rms.
Waveform
Sine, Square, Triangular, +pulse, -pulse, Ramp.
Amplitude
30V p-p at 600 ohms & 50 ohms terminal (open circuit).
Attenuation
2x20dB step & 20dB continuously variable.
Output Impedance
600 ohms, 50 ohms
DC offset
0 to ±15V max. (open circuit)
Sinewave Distortion
(Pulse Duty) <3%
Symmetry on/off
In off mode 50% duty cycle
Reg. DC Power Supply
0 to 32V / 2 Amp independent ON/OFF switchable
Display
3 digit, 0.5u00b2 LED display for voltage or current switchable
Voltage
Coarse & Fine control
Current Limit
Desired current setting
Current Limit LED
Indicates when current limit is reached
Power
115V/230V AC ±10%, 47-65Hz, 125VA (max) switchable
Dimensions
360 (W) x 190 (H) x 375 (D) mm.
Accessories
1: BNC to BNC Cable
2: BNC to Alligator Clip
3: Instruction Manual
