Sorensen XPL30-2T DC Power Supply 125 W, Dual 0-30 V, 0-2 A, + fixed 3rd output

Home > SHOP ALL PRODUCTS > Power Supplies > DC power supplies >

Sorensen XPL30-2T DC Power Supply 125 W, Dual 0-30 V, 0-2 A, + fixed 3rd output.

List Price: $1,092.47 US Dollars

Availability: Ask for availability +1 (619) 879-6696
Product Code: XPL 30-2T

Description

Application Notes

Datasheet PDF Format

Electrical Specifications
	Output voltage	0-30 V
	Output current	0-2 A
	Outputs	3
	Output power	125 W
	Operating mode	Constant voltage or constant current with automatic cross-over and indication
	Voltage setting	By coarse and fine controls
	Current setting	By single logarithmic control
	Line regulation	<0.01% of max. output for a 10% line voltage change
	Load regulation	<0.01% of max. output for a 90% load change
	Output impedance	Typically <5mW in constant voltage mode. Typically >50kW in constant current mode.
	Ripple and noise (200MHz)	Typically <1mV rms (CV mode)
	Transient response	<20ms to within 50mV of set level for 90% load change
	Temperature coefficient	Typically <100ppm/oC
	Output protection	Outputs will withstand forward voltages of up to 20 V above the rated output voltage. Reverse protection by diode clamp for current up to 3 A
	Status indication	Output ON lamps. Constant current mode lamps
	Output switch	Electronic. Preset voltage and current displayed when output is off
	Output terminals	4mm terminals on 19mm (0.75") pitch
	Meter resolutions	100 mV, 10 mA
	Meter accuracy:
	Voltage	0.3% +/- 1 digit
	Current	0.6% +/- 1 digit
	Logic Output
	Voltage	5 V or 3.3 V, selectable by front panel switch
	Voltage accuracy	+/- 3%
	Current limit	1 A minimum
	Load regulation	<0.5% for a 90% load change
	Line regulation	<0.1% for a 10% line voltage change
	Ripple and noise (20MHz bandwidth)	Typically <1mV rms (CV mode)
	Output Protection	Output will withstand up to 16V forward voltage. Diode lamp reverse protection for currents to 3A.
	Output terminals	4mm terminals on 19mm (0.75") pitch
	Status indication	Current limit lamp
	General Specifications
	AC input	115 V or 230 VAC +/- 10% (adjustable internally, option HV for factory set 230 VAC input) Installation Category ll
	Power consumption	320 VA
	Operating range	5oC to 40oC, 20% to 80% RH
	Storage range	-40oC to + 70oC
	Environmental	Indoor use at altitudes to 2000m, Pollution Degree 2
	Cooling	Silent fan-less convection cooling
	Safety	Complies with EN61010-1
	EMC	Complies with EN61326
	Dimensions (HxWxD)	6.3 x 10.2 x 11.6"/160 X 260 x 295mm
	Weight	16.5 lb/7.5 kg
	Warranty	3 years
	Regulatory Approvals
	CE-marked units meet: EN61010-1 and EN61326

Note: Specifications subject to change without notice.

Features

The Sorensen XPL series has been designed to meet the need for compact power supply at a reasonable price. The XPL series provides 30 to 125 watts of programmable linear DC power. The XPL is a compact, high performance low cost power supply suited for benchtop applications.

The XPL Series uses linear regulation for high performance. The XPL Series features excellent line and load regulation with low noise and good transient response. The XPL Series is available in a single, dual and triple output for benchtop use

The XPL dual output model has two independent and isolated outputs each with a 0 to 30V, 0 to 2A capability and its own on–off switch. The outputs can be wired in either series or parallel to provide voltages up to 60 volts or currents up to 4 amps. All outputs are instrinsically short circuit proof, and are protected against external voltages and reverse currents. The XPL triple output model has the same features as the dual output model with an additional switchable fixed output of 3.3V and 5V.

Key Features

Low noise
Excellent line⁄load regulation
Coarse and fine voltage controls
Constant voltage or constant current operation with automatic crossover and mode indication
Individual on⁄off switch per output (not including fixed output)
Switchable 3.3V⁄5V output on triple output model

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

SHOP ALL PRODUCTS > Power Supplies > DC power supplies
SHOP ALL PRODUCTS > Power Supplies > DC power supplies > Less than 600 W power supplies
SHOP ALL PRODUCTS > Brands > Sorensen
SHOP ALL PRODUCTS > Power Supplies
SHOP ALL PRODUCTS > Brands
SHOP ALL PRODUCTS

	Rigol SD-DS2 Serial data decode option for DS2000 series oscilloscopes. Includes RS-232, I2C, and SPI decoding. Discontinued Product
	BK Precision 4007B 7 MHz DDS Function Generator $465.00
	Instek APS-002 RS232 Interface card for APS-7050/APS-7100 $144.00
	BK Precision 4054 25 Mhz Dual Channel Function/Arbitrary Waveform Generator Discontinued
	Rigol MSO4012 100MHz ,4GSa/s, 2CH Mixed Signal Oscilloscope $3,699.00
	BK Precision AN 306 Dipole Antenna (4.7 to 6.2GHz) for model 2658. New in Box. $349.00
	Instek LCR-8250A - 10Hz~50MHz High-Precision LCR Meter $30,321.00
	Tektronix DPO7SSD-W10 Solid State Drive assembly for DPO7000C or MSO/DPO70000C/DX; customer-installable removable drive with Microsoft Windows 10 OS, TekScope and applications software installed $2,744.80 USD
	Rigol DG821 25MHz Function Generator, 1 Channel, 125MSa/sec, 16Bit Resolution, 2M Memory $309.00