Sorensen XPH35-5 DC Power Supply 175 W, 0-35 V, 0-5 A

Home > SHOP ALL PRODUCTS > Power Supplies > DC power supplies >

Sorensen XPH35-5 DC Power Supply 175 W, 0-35 V, 0-5 A.

List Price: $965.14 US Dollars

Availability: Ask for availability +1 (619) 879-6696
Product Code: XPH 35-5

Description

Application Notes

Datasheet PDF Format

	Electrical Specifications
	Output Ratings:
	Output voltage	0 - 35 V
	Output current	0 - 5 A
	Outputs	1
	Output power	175 W
	Operating mode	Constant voltage or constant current with automatic cross-over and indication
	Voltage setting	By coarse and fine controls
	Current setting	By single logarithmic control
	Output impedance	Typically <5mW in constant voltage mode. Typically >20kW in constant current mode.
	Line regulation	<0.01% of max. output for a 10% line voltage change
	Load regulation	<0.01% of max. output for a 90% load change
	Ripple and noise (20 MHz bandwidth)	Typically <2 mV rms, <10 mV pk-pk
	Transient response	<200ms to within 50 mV of set level for 90% load change
	Temperature coefficient	Typically <100ppm/oC
	Output protection	Outputs will withstand forward voltages up to 40 V
	Status indication	Output ON lamps. Constant current mode lamps.
	Output switch	Electronic. Preset voltage/current displayed with output off.
	Output terminals	4mm terminals on 19mm (0.75") pitch. Special safety terminals on XPH 75-2
	Meters (main outputs):
	Meter types	Separate 3 digit meters for voltage and current with 14mm (0.56") LED displays. Reading rate 4/sec (4 digit voltmeter on XPH 75-2)
	Meter resolution	100 mV, 10 mA
	Meter accuracy:
	Voltage	0.3% +/- 1 digit
	Current	0.6% +/- 1 digit
	General Specifications
	Cooling	Convection (Fan assisted for XPH 42-10)
	Output terminals:
	Standard type	4mm "binding post" terminals suitable for plugs or wires
	Optional (all models)	4mm safety sockets, suitable for shrouded plugs
	AC input	110 to 120 VAC +/- 10%, 50/60 Hz
	Consumption	400 VA
	Operating range	5oC to 40oC, 20% to 80% RH
	Storage range	-40oC to 70oC
	Environmental	Indoor use at altitudes to 2000m, Pollution Degree 2
	Safety	Complies with EN61010-1
	EMC	Complies with EN61326
	Dimensions (HxWxD)	160 x 140 x 320mm
	Unit weight	6.2 lbs/2.8 kg
	Warranty	3 years

	Regulatory Approvals
	CE-marked units meet: EM61010-1 and EN61326

Note: Specifications subject to change without notice.

Features

The Sorensen XPH Series provides 175 to 420 watts of DC power. The XPH is a compact, high performance low cost power supply suited for benchtop applications.

The XPH Series uses combined switch–mode pre–regulation with linear post-regulation to provide performance comparable with an all linear design. The XPH features excellent line and load regulation with low noise and good transient response. The XPH Series is available in a single, dual and triple output for benchtop use.

The XPH dual output models have two independent and isolated outputs with its own on–off switch. The outputs can be wired in either series or parallel to provide higher voltage and higher current output. All outputs are instrinsically short circuit proof, and are protected against external voltages and reverse currents. The XPH triple output model has the same features as the dual output model with an additional switchable fixed output of 3.3V and 5V.

Key Features

Low noise
Excellent line⁄load regulation
Coarse and fine voltage controls
Constant voltage or constant current operation with automatic crossover and mode indication
Individual ON⁄Off switch per output (not including fixed output)
Switchable 3.3V⁄5V output on triple output model
Switchable remote sense (XPH 1810 amd XPH 4210 models)

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

SHOP ALL PRODUCTS > Power Supplies > DC power supplies
SHOP ALL PRODUCTS > Power Supplies > DC power supplies > Less than 600 W power supplies
SHOP ALL PRODUCTS > Brands > Sorensen
SHOP ALL PRODUCTS > Power Supplies
SHOP ALL PRODUCTS > Brands
SHOP ALL PRODUCTS

	Rigol MSO7054 500MHZ Digital Oscilloscope with 4 Channels, 10GSa/Sec Sampling $11,299.00
	Rigol MSO7034 350MHZ Digital Oscilloscope with 4 Channels, 10GSa/Sec Sampling $8,299.00
	Tektronix RSACONV7K-AB-2 RSA7100A to RSA7100B conversion incl. controller for unit with no IQFlow no GPS (Applies to S/N: 30EAD31 30F9AAB 30F9AAA 3107843 30F90B2 312CD57 3104546) $44,000.00 USD
	Amrel HPS15-2403 DC Power Supply, 36KW, 0-15Vdc, 0-2403Vdc Call us for Price and Availability. (619) 879-6696
	Amrel HPS330X225 DC Power Supply, 75KW, 0-330Vdc, 0-225Adc Call us for Price and Availability. (619) 879-6696
	Rigol DS1104Z-S 100 MHz Digital Oscilloscope with 4 channels and 25 MHz 2 channel integrated source plus 12 Mpt memory and connectivity and 1 GSa/sec sampling. Discontinued Product
	Rigol RM-DS4000 Rack Mounting Kit for a DS4000 Series Oscilloscopes $347.00
	Preen AC POWER AFC-11008 AC Power Supply 300 Volts, 33.3 Amps. 8 KvA Single Phase $7,671.00
	Tektronix MSO5034B Mixed Signal Oscilloscope; Digital Phosphor, 350MHz, 5GS/s, 25M Record Length, 4+16ch $22,466.00 USD