|
Specifications |
Model 4040A |
|
Frequency Characteristics |
|
|
Waveforms |
Sine, Square, Triangle, +-Pulse, +-Ramp |
|
Range |
0.2Hz to 20 MHz in 8 ranges |
|
Resolution |
5 digits |
|
Tuning Range |
10:1 |
|
Fine |
+-5% of coarse setting |
|
Variable Duty Cycle |
15:85:15 cont variable |
|
Operating Modes |
Normal, sweep, VCG, AM, FM, burst |
|
Output Characteristics |
|
|
Impedance |
50 W +- 10% |
|
Level |
20 V p-p Open circuit, 10V p-p into 50 W |
|
Amplitude |
Variable, 20 dB range typical |
|
Attenuation |
-20 dB +- 1 dB |
|
DC Offset |
Preset +- 0.1 V type Variable: +- 10V open-circuit +-5 into 50 W |
|
SINE Wave |
|
|
Distortion |
<=3% typical at 1 kHz |
|
Flatness |
+-5% +-(.45 dB) 0.1 Hz to 8 MHz |
|
|
+-20% +-(2.0 dB) 8 MHz to 20 MHz |
|
Square wave |
|
|
Symmetry |
0.2 Hz to 100 kHz < 2% |
|
Rise time |
<= 30 ns |
|
Triangle Wave |
Linearity: >= 98% to 100 kHz |
|
TTL Output |
|
|
Level |
0.8V to 2.4V |
|
Rise time |
<= 20 nS |
|
Duty Cycle |
50% typical |
|
CMOS Output |
|
|
Max. Frequency |
2 MHz |
|
Level |
4V to 14V +-0.5 p-p cont. variable |
|
Rise Time |
<= 120 nS |
|
VCG (Voltage controlled generator) |
|
|
Input Voltage |
0-10V +- 1V causes a 100:1 frequency change |
|
Impedance |
10k W +-5% |
|
Mode |
LIN/LOG |
|
Width |
100:1 continuously variable |
|
Rate |
20 ms to 2 s cont variable |
|
Sweep Output |
0 to 2V |
|
Start/Stop Frequencies |
Adjustable |
|
Frequency Counter |
|
|
Accuracy |
Time base accuracy +- 1 count |
|
Time Base Accuracy |
+- 10 ppm (23 0 +-5 0 C) |
|
Display |
5 digit LED |
|
Mode |
INT or EXT |
|
External Input |
|
|
Frequency |
5 Hz to 30 MHz |
|
Resolution |
0.1, 1, 10, 100, 1 kHz |
|
Sensitivity |
25Vrms |
|
Power Source |
120/230 VAC +-10%
50/60 Hz, internal jumper selectable |
|
Dimensions |
5.5x11.75x10.575''
(140x298x264) |
|
Weight |
4.5 lbs. (2 kg) |
|
AM MODULATION CHARACTERISTICS |
|
Source |
Internal, External |
|
Modulation Ratio |
0 to 100% |
|
Int modulation |
1 kHz |
|
Ext Modulation |
DC to 500 kHz |
|
Ext Sensitivity |
Less than 10V p-p for 100% modulation |
|
FM MODULATION CHARACTERISTICS |
|
Source |
Internal, External |
|
Modulation Ratio |
0 to 100% |
|
Deviation |
0 to 5% |
|
INT Modulation |
1 kHz |
|
Ext Modulation |
DC to 500 kHz |
|
Ext Sensitivity |
Less than 10V p-p for 100% modulation |
|
BURST CHARACTERISTIC |
|
Source |
Internal, External |
|
Burst Width |
Cont. variable from 5% to 90% of internal gating frequency |
|
Repetition Rate |
0.5 Hz to 50 Hz, internal |
|
|
DC to 500 kHz external |
|
External Level |
TTL levels |
|
Burst Frequency |
Determined by main generator frequency setting. |
|
Two Year Warranty |
|
Accessories |
|
SUPPLIED: Output Cable with BNC to Alligator Clips, Instruction Manual Carrying Case (not included): LC-40 |
